WARNING: This website is obsolete! Please follow this link to get to the new Albert@Home website!

Posts by x3mEn

1) Message boards : News : Sending work (Message 111540)
Posted 11 Dec 2011 by Profile x3mEn
Post:
Aborting task p2030.20100912.G57.94-00.24.S.b5s0g0.00000_416_1: exceeded elapsed time limit 6394.64 (2800000.00G/432.72G)

3 WUs were aborted after ~6395 sec of run time for the same reason:
p2030.20100912.G57.94-00.24.S.b5s0g0.00000_416_1 - 6,395.56 sec
p2030.20100913.G44.55+00.20.C.b5s0g0.00000_1824_2 - 6,395.53 sec
p2030.20100912.G57.94-00.24.S.b5s0g0.00000_744_0 - 6,395.32 sec

WTF?
2) Message boards : News : Sending work (Message 111484)
Posted 3 Dec 2011 by Profile x3mEn
Post:
Completed, marked as invalid
WTF?
3) Message boards : News : Sending work (Message 111411)
Posted 24 Nov 2011 by Profile x3mEn
Post:
HD4890: 1WU = 62,806.60 sec = 17.5 hours and... 500.00 credits only, I guess? )
I understand, that A@H is a test project, but for my opinion it's a waste of time for HD4890.
Don't say me that HD4890 is a low-end GPU )
HD4890 brought me 1Ms in Collatz, MilkyWay, Moo! Wrapper.
In these projects HD4890 is more effective than GTX460, which usually spend only 1 hour for the same WU at Einstein@Home.
4) Message boards : News : Sending work (Message 111231)
Posted 10 Nov 2011 by Profile x3mEn
Post:
The same result as Ageless already has showed:
http://albert.phys.uwm.edu/result.php?resultid=38235
5) Message boards : News : Sending work (Message 111227)
Posted 10 Nov 2011 by Profile x3mEn
Post:
But the messages aren't gone, they are just in a window of their own, reachable by clicking advanced->Event Log, or pressing CTRL+SHIFT+E.

I know, but it's inconvenient to use.
6) Message boards : News : Sending work (Message 111224)
Posted 10 Nov 2011 by Profile x3mEn
Post:
So? Just because Lunatics built a 3rd party application for Seti only that does the OpenCL detection, does not mean that the BOINC you're running does the OpenCL detection. This project uses the OpenCL detection built into the 6.13 clients to determine all OpenCL capable co-processors.

Ok. Fine. Clear.
I'll try 6.13 some later, despite the fact that I don't like > 6.10 interface without Messages tab.
7) Message boards : News : Sending work (Message 111221)
Posted 9 Nov 2011 by Profile x3mEn
Post:
I wouldn't expect OpenCL to work with clients older than 6.13.

Reminds me: we should probably add a client version restriction for these apps.

BM


FYI, look at this: http://setiathome.berkeley.edu/result.php?resultid=2146353363

OpenCL platform detected: NVIDIA Corporation
OpenCL platform detected: Advanced Micro Devices, Inc.

and all other helpful info about OpenCL detection with BOINC 6.10.60
8) Message boards : News : Sending work (Message 111218)
Posted 9 Nov 2011 by Profile x3mEn
Post:
[21:26:46][3292][INFO ] Starting data processing...
GPU type not found in init_data.xml
[21:26:46][3292][ERROR] Failed to get OpenCL platform/device info from BOINC (error: -161)!
[21:26:46][3292][ERROR] Demodulation failed (error: -161)!
[21:26:46][3292][DEBUG] Shutting down BOINC... Bye!
21:26:46 (3292): called boinc_finish

http://albert.phys.uwm.edu/result.php?resultid=37885
9) Message boards : News : Sending work (Message 111204)
Posted 2 Nov 2011 by Profile x3mEn
Post:
[20:05:56][5684][INFO ] Starting data processing...
[20:05:56][5684][ERROR] Failed to get OpenCL platform/device info from BOINC (error: -31)!
[20:05:56][5684][ERROR] Demodulation failed (error: -31)!

http://albert.phys.uwm.edu/result.php?resultid=35469






This material is based upon work supported by the National Science Foundation (NSF) under Grant PHY-0555655 and by the Max Planck Gesellschaft (MPG). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the investigators and do not necessarily reflect the views of the NSF or the MPG.

Copyright © 2024 Bruce Allen for the LIGO Scientific Collaboration